TIPS & VIDEOS
Welcome to our Tips and Videos section. Here you'll find videos of different folks talking about the benefits of RoadWrap and RugWrap, as well as some helpful Application Videos. Scroll further down for more tips and helpful hints.
VIDEOS
TIPS
1. Road Wrap can be cut to fit any vehicle and left on for up to seven days. Always be sure to apply on clean and dry areas only.
2. Attach film to one side of vehicle. As you pull product across the vehicle, smooth film out during application. If you need to reposition, simply peel the film up and reapply. Once you reach the other side, use the tool included and cut to desired length. For a smoother appearance, apply a soft cloth on the top edge of the slitter and use as a squeegee while installing Road Wrap. For better results use one of our felt edge applicators for an easier installation.
3. When applying more than one row, begin with the top strip and work your way down while allowing a 1-3 inch overlap of the bottom strip.
4. After your Road Wrap has been applied, use the included cutting tool to trim the opening for the grill and air dam areas. (CAUTION! SKIPPING THIS STEP COULD ALLOW VEHICLE TO OVERHEAT AND POSSIBLY CAUSE ENGINE DAMAGE.)Make sure you use the tool to trim the film near the edge of the fenders. Do not tuck the film inside the fender wells because dirt and grime will not allow the film to adhere.
5. Always make sure the edges of the film are applied as smooth and wrinkle free as possible to avoid separation when traveling. The better the application, the better the results. This will eliminate any possible flapping while traveling at high speeds. If the film separates from the vehicle, remove that section immediately to avoid any road debris from attaching under the film and damaging paint.
WARNING: DO NOT PUT ON WINDSHIELD.
REMOVAL
Road Wrap makes removal easy and clean. After traveling on vacation or commuting back and forth to work all week, the film is then simply removed without any harm to your paint and discarded leaving your vehicle clean. If any glue residue is left on vehicle after using Road Wrap, simply use rubbing alcohol or a citrus based cleaner on a soft cloth to remove.
HELFUL HINTS
• Apply film in a shaded, well lit, dust free environment.
• Film best applied between 50F – 90F.
• Installation is easier with two people.
• Wrap the cutting tool with a soft cloth or use one of our felt edge applicators for an easier installation
• The film cut from the grill area can be applied to side view mirrors if needed.
• Once you are done using Road Wrap place back in box.
To Be A Distributor: ed@buyroadwrap.com
For Information: info@buyroadwrap.com
Toll Free Phone # (888) 806-7474
Copyright 2008 World Class Concepts LLC, Kenner, LA 70062, USA
WCC provides a limited warranty for the products it manufactures. This warranty is made solely to the original purchaser and may not be transferred. Warranty covers film that is applied to a properly prepared vehicle in accordance with the instructions. It does not cover any paint failure such as peeling, fading or any other defects coming from a non factory finish. The determination of the suitability of a product for the specific application is the customer’s responsibility. If this product fails to conform to the warranty during the application period, purchaser may obtain replacement of product.
|
